5-Mode 6700K 900-Lumen Smooth Aluminum Drop-in Module w/ CREE XML-T6 / Textured Reflector Overview:- Aluminum construction with textured reflector
- Features a CREE XML-T6 LED emitter
- 5-mode driver circuitry: Low > Mid > Hi > Fast Strobe > SOS
- With mode memory
- Color temperature: 6500-6700K white
- Luminous flux: 900LM
- Working voltage: 5.8~12V
- Current output: 3A at high mode
- Diameter at bezel edge: 5.2cm
- Height with support spring: 2.6cm
- Max diameter of support spring: 1.7cm
Dimensions: 2.20 in x 2.05 in x 2.05 in (5.6 cm x 5.2 cm x 5.2 cm)
Weight: 2.33 oz (66 g)
This a perfect drop in module for maglite 3D. Thanks to this drop in module, my maglite 3D is upgraded in less than 2 hours. Quality is good. LED is very bright.
This LED will work with 3 18650 fully charged batteries. has...
Very good drop-in. It is the maximum output of light that you can get out from a Cree XM-L T6.
It absorbs 1.2 Amps @ 10 Volt that makes 12W.
The led XML-T& can handle 10W. If the driver has an efficiency about 80% than...
- Very well designed good quality reflector
- LED is perfectly mounted for the reflector
- Decent throw (about 200m) with excellent spill, adequate to light up a very large area on high.
- Mode memory!
- Seems to have a 3A...
Really nice module. Very bright and modes work good. Gives a really nice, tight hotspot and a decent spill.
I have put it in a divelight and its very good for signalling and technical diving. Penetrates the water very At i...
- reflector is big enough to act as a radiator and has a decent spill - I found an aspheric lens here on dealextreme to match the front diameter and I found out that I have a much more small angle on the beam compared to a...
- reflector is big enough to act as a radiator and has a decent spill - I found an aspheric lens here on dealextreme to match the front I...
This a perfect drop in module for maglite 3D. Thanks to this drop in module, my maglite 3D is upgraded in less than 2 hours. Quality is 3...
Very good drop-in. It is the maximum output of light that you can get out from a Cree XM-L T6.
It absorbs 1.2 Amps @ 10 Volt that makes a...
