Monday, October 12, 2015

5-Mode 1200-Lumen White Light Drop-in LED Module w/ 6*Cree Q5 WB (52.7mm*42mm/8.4V Max)

5-Mode 1200-Lumen White Light Drop-in LED Module w/ 6*Cree Q5 WB (52.7mm*42mm/8.4V Max)


5-Mode 1200-Lumen White Light Drop-in LED Module w/ 6*Cree Q5 WB (52.7mm*42mm/8.4V Max)
5-Mode 1200-Lumen White Light Drop-in LED Module w/ 6*Cree Q5 WB (52.7mm*42mm/8.4V Max)






Overview:
- Aluminum construction
- Features 6 x Cree LED emitters
- 6 x White Cree Q5
- 5-mode driver circuitry: Hi (800mA 1200LM) > Mid (600mA 800LM) > Lo (300mA 300LM) > Fast
Strobe (700mA 800LM) > SOS (800mA 1200LM)
- Maximum accepted voltage input: 8.4V
- 800mA current output measured at LED (manufacturer rated)
- Diameter at bezel edge: 52.7mm
- Height without support spring: 42mm
- Height with support spring: 56mm
- Minimum spring diameter: 26.7mm
- Large spring diameter: 0.9mm
- Small spring diameter: 0.7mm





Specifications:



Dimensions: 2.05 in x 2.05 in x 2.05 in (5.2 cm x 5.2 cm x 5.2 cm)
Weight: 3.00 oz (85 g)







Photo 5-Mode 1200-Lumen White Light Drop-in LED Module w/ 6*Cree Q5 WB (52.7mm*42mm/8.4V Max)











5-Mode 1200-Lumen White Light Drop-in LED Module w/ 6*Cree Q5 WB (52.7mm*42mm/8.4V Max)
5-Mode 1200-Lumen White Light Drop-in LED Module w/ 6*Cree Q5 WB (52.7mm*42mm/8.4V Max)




Reviews 5-Mode 1200-Lumen White Light Drop-in LED Module w/ 6*Cree Q5 WB (52.7mm*42mm/8.4V Max)



It would be nice to have specifications in how to use the product : electrical wiring, mechanical mounting, may be other product associated for its using ?


I bought this module in 2012 and it was brighter than my original HiD Bulb, it still is . This conversion only took me a few hours and has done a couple of hundred dives so far with no problems. If you are looking for a is...


Really robust construction. Reflector have good construction. Body is a piece of aluminum, so heat is well vented to ambient. Nevertheless, it is necessary to use cooler, because after 15minutach traffic, using 100% mode I...


Reflektor ma serioznu konstrukciu. Mne doruceny kus mal vsetky ledky pomerne presne ulozene v ohnisku parabol-odskusany kazdy reflektor zvlast. Pouzity je kus hlinika, takze teplo je velmi dobre odvadzane do okolia. tomu a...


Its reflectors are smooth and well made, its emitters well centered, and its springs were soldered solidly. It fits perfectly into my Maglite 4D, it has the 5 modes as stated and its beam is much brighter than the bulb of...


Its reflectors are smooth and well made, its emitters well centered, and its springs were soldered solidly. It fits perfectly into my 4D,...


It would be nice to have specifications in how to use the product : electrical wiring, mechanical mounting, may be other product for its...


I bought this module in 2012 and it was brighter than my original HiD Bulb, it still is . This conversion only took me a few hours and a...